260 Degree Heat Resistant Industries Felt Fabric Felt Belt For Printing Machinery
Heat Transfer Printing Belts are produced from 100% Nomex fiber. They are the most important component of the heat transfer printing machines. We can offer the felts with the normal and special size according to customer’s request.
Felt Features: needled felt, smooth surface,elastic, non-off tracking.
Heat Transfer Printing Felts are used on the following machines : Monti, Lemaire, Bater, Stork, Futanet, Gessner etc.
The heat-transfer machine blankets’ temperature resistance is 260℃,it is made of imported raw material,blanket with smooth surface, no wandering, not springing, no burr, long service life and shrinkage rate will be controlled within 2%, this kind of endless felt belt is very suitable for all kinds of brand machine.
Heat Transfer Printing felt belts
These felts are the most important component of the heat transfer printing machines. We can offer the felts with the normal and special size according to customer’s request. Felt Features: needled felt, smooth surface, elastic, non-off tracking
Some of commonly used size for your reference:
The perimeter(MM) ———————— Width(MM) ———————— Thickness(MM)
1320 ———————————- 1215 ———————————- 8
3140 ———————————- 1960 ———————————- 8
2240 ———————————- 1700 ———————————- 8
If you have other demands about the size, kindly let me know, we accept the customization.
1. Selection Of Brand Raw Material,Common Specifications Have Temperature 160-180℃ And 220-260℃.
2. The Felt Belt Contains Heat Shrinkable Fiber Material Inside,The Felt Will Automatically Shrink After Heating,Wrapped Tightly.
3. The Belt Surface Formation,Uniform Density,Good Resistance,Long Work Life.
Our heat transfer printing blankets are mainly used for roll to roll heat transfer printing machines, rotary transfer printing machines and other plat type Sublimation transfer machine. such as Italy Farah, Rafah, Mantian, Santex, Japan East Valley,Texas691.692, Haining Shrink Machine,Monti, Lemaire, Bater, Stork, Futanet, Gessner, etc. All the size could be customized, welcome contact us to get the details.
Direction of our felt belt
1. The blanket must be install as the direction of the arrow, fixing both sides of the perimeter
to see if the perimeter is the same.
2. Adjust the machine pressure within 2kg. heat up to 150 ℃, idle for 2 hours; heat up to
170℃, idle for 2 hours; heat up to 190℃, idle 3 hours( important); heat up to 200℃,
idle for 2 hours.
3. Then the belt will suitable for your machine, you can adjust the machine pressure in 3–5kg
according to your needed and start to printing
Package: plastic bag+carton
Delivery: Express company & by air & by sea or as your demands