Our company’s blankets contain a network of spiral structure inside, after high-temperature finalize the design process, the structure is very stable, the width and length will not contraction or elongation, the surface is uniform, uniform density, good wear resistance. Smooth operation, easy deviation, long service life.

Thermal transfer printing equipment Blanket, also called endless seamless blanket, endless loop blanket tape, is made of 100% nomex fiber, the maximum temperature of 250 degrees Celsius, due to the special process, so there have no joints and it is the real seamless , the surface is more smooth, and has acid, alkali, heat, cold, abrasion, oil, burning resistance, high temperature, flame retardant, heat, non-slip, moisture, anti-static, anti-corrosion and other features.

Heat Transfer Printing Belts are produced from 100% Nomex fiber. They are the most important component of the heat transfer printing machines. We can offer the felts with the normal and special size according to customer’s request.

Felt Features: needled felt, smooth surface,elastic, non-off tracking.

Heat Transfer Printing Felts are used on the following machines : Monti, Lemaire, Bater, Stork, Futanet, Gessner etc.

Product specification

Some of commonly used size for your reference:

The perimeter(MM) ———————— Width(MM) ———————— Thickness(MM)

1320  ———————————-  1215  ———————————-  8

3140  ———————————-  1960  ———————————-  8

2240  ———————————-  1700  ———————————-  8

If you have other demands about the size, kindly let me know, we accept the customization.

Product Advantage

1.  Misaligned—-Our base cloth is use endless industrial  silk. Testing report showed the misaligned rate is about ±3mm.  enclosed our base cloth for your consideration

2.  Shrinkage—-The base cloth can control the shrinkage rate in 2.5%–3%.

3.  Material—100% DUPONT Nomex.

Product Application

 Our heat transfer printing blankets are mainly used for roll to roll heat transfer printing machines, rotary transfer printing machines and other plat type Sublimation transfer machine. such as Italy Farah, Rafah, Mantian, Santex, Japan East Valley,Texas691.692, Haining Shrink Machine,Monti, Lemaire, Bater, Stork, Futanet, Gessner, etc. All the size could be customized, welcome contact us to get the details.

Direction of our felt belt 

1. The blanket must be install as the direction of the arrow, fixing both sides of the perimeter

to see if the perimeter is the same.

2. Adjust the machine pressure within 2kg. heat up to 150 ℃, idle for 2 hours; heat up to

170℃, idle for 2 hours; heat up to 190℃, idle 3 hours( important); heat up to 200℃,

idle for 2 hours.

3. Then the belt will suitable for your machine, you can adjust the machine pressure in 3–5kg

according to your needed and start to printing

Package&Delivery

Package: plastic bag+carton

Delivery: Express company & by air & by sea or as your demands